Click To Call(656) 254-4687Click To Get A Free Estimate
Homeowners on a sealed dark paver surface in front of a ranch style house with a metal roof

Keep brick pavers rich in color and easy to rinse

Brick Paver Sealing in Zephyrhills, FL

Book a free estimate for your Zephyrhills brick pavers, or call (656) 254-4687 to talk with a local contractor.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.25 to $2.50 a sq ft to clean, sand and seal
Call Now(656) 254-4687

Do you seal brick pavers in Zephyrhills, FL, and how quickly will someone reply?

Yes, a local contractor seals brick pavers in Zephyrhills, FL, and a reply comes within 1 business day, frequently the same morning. The estimate is free and booking is optional. To begin, call (656) 254-4687.

Brick is a classic look that most Zephyrhills owners want to keep, and the right sealer depends on what kind of brick it is. A good coat deepens the color, helps hold the joint sand and lets rain and dust rinse off with less scrubbing. Left bare, brick can pick up green growth, white haze and oak stains. Tell the contractor what you see on yours when you ask for a free estimate.

Call (656) 254-4687

Which Zephyrhills areas can book brick paver sealing?

Brick paver estimates are open to Zephyrhills homes and every place linked below, throughout Pasco, Hillsborough and Polk counties. Each page holds notes for its own area. If yours is missing, call (656) 254-4687.

Brick-pattern pavers with a broom and a line of new sand beside a section still gray from old dirt

Are my brick pavers clay or concrete, and does it change the sealer?

It does, and plenty of owners are unsure which they have. Rusty's Pro Wash & Seal says concrete pavers are the most common type around Tampa Bay and that brick absorbs sealer differently, often needing a product made for clay. A contractor can tell which you own at the walk-through. To book one, call (656) 254-4687.

Clay pavers are fired, and Rising Tide Paver Sealing, a Florida company, quotes the Brick Industry Association saying the color runs through the whole body at almost 2,000 degrees. That is why clay does not fade like concrete. Concrete pavers are the ones sealed to keep color rich, Rising Tide notes. Ask what you have when you ask for a free estimate.

Does real clay brick even need sealer in Zephyrhills?

Often not. The Brick Industry Association, as quoted by Rising Tide, says most clay pavers exceed 10,000 psi, resist absorbing stains and can be kept clean by regular sweeping, so sealing is optional. People still choose it for richer color or easier cleanup after oak season. To talk through whether yours needs a coat, call (656) 254-4687.

Unilock adds a caution that matters here: sealers made for concrete may not suit brick or natural stone. A wrong product can haze, stain or darken clay. A contractor who asks first whether your brick is clay has done the right homework. Raise it when you ask for a free estimate.

Which sealer goes on brick pavers around Zephyrhills?

Three families come up. Rising Tide Paver Sealing lists acrylic for a wet look, silane or siloxane for a penetrating matte finish and urethane for high gloss, noting that acrylics made for concrete pavers do not yellow. Local companies also use water-based products: Warren's Power Washing in Ocala uses Trident, and Tactical Pressure Washing & Paver Sealing uses a polyurethane. To compare them for your brick, call (656) 254-4687.

Acrylic

A wet look finish. Rising Tide says acrylics made for concrete pavers do not yellow over time.

Silane or siloxane

A penetrating, flat matte finish that lets moisture move through, so it suits brick that needs to breathe.

Urethane

High gloss and tougher against chemicals, but Rising Tide says it cannot be refreshed by a simple recoat and removal is a bigger job.

Why choose us

Why test a small spot on brick pavers before sealing?

Because brick reacts differently from concrete. The Brick Industry Association advises testing cleaners and other products on a small area first, since some can haze, stain or discolor clay, and Rising Tide recommends a test area before coating the whole surface. A tucked-away corner near the garage wall works. To set up a test patch, call (656) 254-4687.

A spot test also lets you judge the finish in real light. Wet look reads one way at noon and another under a lanai roof. Ask for the patch to be left a day when you ask for a free estimate.

What is the white haze on my brick pavers in Zephyrhills?

Most often it is efflorescence, a mineral haze that rises with moisture. West Coast Sealing Solutions, a Hillsborough County company, treats efflorescence with a mild organic acid cleaner, and Unilock says it should be cleaned off and the surface dried before any sealer goes on. Sealing over it can cloud the finish. To have a haze identified, call (656) 254-4687.

Rusty's Pro Wash & Seal says sealer haze, efflorescence and hard water deposits each need a different fix, which is why a contractor names the cause before choosing a treatment. Hard water from sprinklers leaves deposits in parts of Pasco County. Describe the pattern when you ask for a free estimate.

How do Zephyrhills summers affect brick paver sealing?

Moisture and heat both matter. Zephyrhills gets about 53 inches of rain a year, mostly from June through September, and the record high is 103 degrees. Warren's Power Washing seals only when the air is above 50 and below 95 degrees and wants two dry hours afterward. To find a clear day for your brick, call (656) 254-4687.

Pure Flow Soft Wash says pavers must be completely dry, typically 24 to 48 hours after cleaning, and Rising Tide lists wet sand and joints among the causes of cloudy sealer. On brick that takes a long time to dry, patience is the whole plan. Ask how drying is checked when you ask for a free estimate.

Will sealed brick look shiny or stay natural?

You choose. Premier Coatings, a paver company that serves Pasco County, sells wet look or natural finishes, West Coast Sealing Solutions has a Super Wet coat that looks wet without gloss and a Natural Luster coat, and Rusty's calls wet look the most requested finish in Tampa Bay. Unilock warns high gloss can turn slippery when wet, which matters on a brick walk by the steps. To see both looks, call (656) 254-4687.

Can brick pavers that have sunk or shifted be sealed?

Only after repair. Unilock says sealing does not fix drainage or subbase problems, and Warren's Power Washing resets and levels a few sunken pavers during its restoration day before refilling joints. West Coast sets sand 1/16 to 1/8 inch below the edge. Pavers that rock underfoot need base work first. To have a brick walk checked, call (656) 254-4687.

Large dips are a mason's job, not a sealer's. Ask the contractor what is included and what is not when you ask for a free estimate.

How often should brick pavers be resealed in Zephyrhills?

Rusty's Pro Wash & Seal and Warren's Power Washing give every 3 to 5 years for pavers, and Rusty's puts a covered area at 5 or more. Rising Tide says shaded, lightly used areas can stretch longer, while sunny, busy spots need attention sooner. Clay with no sealer needs only sweeping and the odd wash. To plan a schedule, call (656) 254-4687.

Pricing

What does brick paver sealing cost in Zephyrhills?

No source gives a rate for brick alone, so this table is built from the pieces Rusty's Pro Wash & Seal does publish: $1.25 to $2.50 per square foot to clean, sand and seal around Tampa Bay, a $500 to $1,000 minimum charge, routine cleaning and sealing at $1,000 to $3,000 and major restoration at $3,000 to $8,000 or more. Pasco County is part of that market. To place your brick in it, ask for a free estimate.

Clay brick can be cheaper when the owner skips the coat and pays only for cleaning, and dearer when a failed film has to be stripped first. West Coast says stripper is used only on pavers with a failed sealer, and that its efflorescence treatment is included in the sealing price. To compare bids line by line, call (656) 254-4687.

JobWhat it coversPublished figure
Small brick walk or borderClean, sand and seal, held to the minimum charge$500 to $1,000
Per square foot, any sizeClean, joint sand and sealer$1.25 to $2.50
Routine jobCleaning and sealing a whole patio or drive$1,000 to $3,000
Major restorationRepairs, stripping a failed coat, re-sanding, resealing$3,000 to $8,000+

Source: Rusty's Pro Wash & Seal, Tampa Bay paver sealing cost page. It publishes no brick-only rate, so these rows are its general figures for clean, sand and seal and for restoration. West Coast Sealing Solutions notes stripper is used only on a failed sealer. Your contractor sets the final price.

Get a Free Estimate

Sealing contractors finishing a brick-look paver area, one with a roller and one holding a spray wand
How it works

How does the brick paver sealing process work, from test spot to cure?

The brick sealing process starts with a question about the paver itself, then follows the same order as any careful job. West Coast Sealing Solutions describes cleaning, stain treatment, sanding and sealing, with a flood coat and a surface coat. To book the first visit, call (656) 254-4687.

1. Identify the paver

Clay or concrete, old sealer or bare. This decides the product.

2. Test a small area

A corner is cleaned and coated so color and finish can be judged before the whole job.

3. Clean and treat

Mold, algae and weeds are killed, then efflorescence and stains get a mild organic acid, as West Coast Sealing Solutions describes.

4. Sand the joints

Fresh sand is worked in until the joints sit 1/16 to 1/8 inch under the edge.

5. Dry and seal

Pavers dry fully, then sealer goes on with low pressure spray equipment. Feet wait about 24 hours.

Contractor describing sealer options on a tablet to two homeowners standing at a paver walk with some green staining
Photos

How do sealed brick-look pavers appear around Zephyrhills?

Freshly sealed paver driveway at a Pasco County home with a brick walk
Sealed paver pool deck at a Pasco County home with a brick walk
Sealed paver patio behind the home at a Pasco County home with a brick walk
Sealed paver walkway to a front door at a Pasco County home with a brick walk
Close view of freshly sealed pavers at a Pasco County home with a brick walk
Paver area with one cleaned half beside a dirty half at a Pasco County home with a brick walk
Contractor cleaning pavers at a Pasco County home with a brick walk
Contractor sealing or sanding pavers at a Pasco County home with a brick walk
Questions

What do Zephyrhills homeowners ask about brick paver sealing?

What do you seal brick pavers with?

It depends on the brick. Rising Tide Paver Sealing, quoting industry bodies, lists acrylic for a wet look, silane or siloxane for a penetrating matte finish and urethane for high gloss on concrete pavers. Rusty's Pro Wash & Seal adds that real brick often needs a product made for clay.

How often should I seal pavers in Florida?

Every three to five years, according to Rusty's Pro Wash & Seal, Unilock and Warren's Power Washing. Clay brick may go longer between coats, or skip sealing altogether, since its color is fired through the body and clay resists stains.

What is the average cost to seal pavers in Florida?

Rusty's Pro Wash & Seal says most Tampa Bay jobs run $1.25 to $2.50 per square foot to clean, sand and seal. Rusty's gives no separate rate for brick, so a contractor prices yours after seeing whether it is clay or concrete and what shape it is in.

Which sealer works best on pavers in Florida?

No single product fits every surface. Warren's Power Washing uses water-based Trident products, Tactical Pressure Washing & Paver Sealing uses a water-based polyurethane, and West Coast Sealing Solutions uses a breathable sealer. Brick usually calls for one that lets moisture out.

Does real clay brick need sealer?

Not the way concrete does. Rising Tide Paver Sealing quotes the Brick Industry Association saying clay pavers do not require sealer and that sealing is optional, done for richer color or easier cleanup. A small test area comes first.

Will sealer change the color of my brick pavers?

A wet look coat deepens color, and a natural finish stays close to the original. Premier Coatings offers wet look or natural, and Rusty's says wet look is the most requested finish around Tampa Bay. Ask to see a test patch before the whole area is coated.

Why did my brick pavers turn white after sealing?

Trapped moisture is the usual cause. Unilock says a whitish film can form from moisture under the coat, too much sealer or an incompatible product, and Rising Tide lists wet sand, efflorescence and thick coats as causes of cloudiness.

Can brick pavers be sealed in a Zephyrhills summer?

Yes, on a dry day. Zephyrhills averages about 53 inches of rain a year with the most from June through September, and Warren's Power Washing seals when the air is between 50 and 95 degrees and stays rain free for two hours afterward.

Who seals brick pavers in Zephyrhills, FL?

A local contractor who serves Zephyrhills and the places on this site, and you hear back within 1 business day, usually much sooner. Getting a quote is free, and walking away from it carries no cost.

Not sure what your brick needs?

Call or use the short form, and a contractor answers within 1 business day, often well before.

Call (656) 254-4687

Free, no obligation